How To Change The Oil In A Riding Lawn Mower

Regular oil changes are critical to keeping your riding backyard mower'due south engine in top shape and prolonging the life of your mower. Watch this video to learn how to modify the oil in a Cub Cadet riding lawn mower. Depending on your mower model, the instructions in this video tutorial may vary slightly from the directions in your operator's transmission. Always refer to your operator'due south manual for comprehensive instructions on changing backyard mower oil before getting started.

INSTRUCTIONS

Pace i: Prepare your riding mower for maintenance. Place your mower on a flat, level surface. Plow the mower off and make sure the engine is cool.  Remove the ignition key, disconnect the spark plug ignition wire, and engage the parking brake. This helps ensure the machine doesn't kickoff accidentally and crusade you or those effectually yous damage.

Step 2: Place a slice of paper-thin under the work area to take hold of oil drips.

Step 3: Utilise an canonical oil bowl to grab the used oil as it is tuckered from the engine.

Pace 4: Clean the oil fill up and oil drain areas. Apply a rag or shop towel to clean effectually the oil make full and bleed to prevent debris from entering the engine.

Step 5: Drain the oil. Remove the dipstick and position the drain hose over the oil basin. Remove the drain plug to start the oil draining from the engine.

Step 6: Allow the engine oil to completely drain.

Step seven: Afterward the oil has drained, reinstall the drain plug.

Step viii: Replace the oil filter. Using an oil filter wrench, unthread the oil filter from the engine.

Step nine: Clean the area around the engine of any spilled oil.

Step 10: Replace the oil filter. Add a lilliputian oil to the seal of the new oil filter. This helps with the install.

Step 11: Using your manus, thread the new oil filter onto the engine. Practise non overtighten.

Step 12: Use your oil filter wrench to snug the fit. Practice not overtighten.

Pace xiii: Add new oil. Use the oil recommended by the engine manufacturer. Fill to the recommended levels.

Stride 14: Reinsert the Dipstick. Check the engine for proper oil levels.

Step xv: Cease and clean up. Clean up any spilled oil and dispose of the used oil at a proper facility.

Pace sixteen: Reconnect the spark plug ignition wires

Cub Cadet Genuine Parts

Always use genuine OEM replacement parts when servicing your equipment. Use our parts finder to locate and gild any replacement parts yous may need for maintenance. Refer to your possessor's manual for additional maintenance information.

Source: https://www.cubcadet.com/en_US/how-to/knowledge-how-to-change-the-oil-in-a-cub-cadet-riding-lawn-mower.html

Posted by: lopezthapt1997.blogspot.com

Share this post